User's Guide

3e-531AP Wireless Access Point
Chapter 6: PC Card Installation on a Laptop
80
29000125-001 C
Performs Site Survey
P
û
Resets to factory default
P
û
Changes power level on Client device
(laptop)
P
P
Can turn Radio On/Off on laptop
P
P
Performs Rescan
P
P
Performs Self-test
P
P
You may need some or all of the following information handy as you
install the FIPS secure drivers on your wireless device’s PC Card inter-
face:
•
The driver con guration utility login. The factory default is User-
name equal to "CryptoOf cer,” and Userid equal to “CryptoFIPS;”
•
Type of encryption used by your WLAN (AES, 3DES, and wheth-
er you will be using Dynamic Key Exchange);
•
Your security certi cate, key and Certi cate Authority (CA), if us-
ing DKE;
•
Your Wireless
SSID;
•
Your
user name and password to access your network account on
the wireless device;
and, if addresses are to be statically assigned:
•
Your
IP address;
•
Your
Gateway address;
•
Your
Subnet Mask.
Follow the instructions that came with your PC Card to complete the
installation. Once the con guration is complete, you should be able to ac-
ces the WLAN.