User's Guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Hardware Installation
- Chapter 3: Access Point Configuration
- Chapter 4: Gateway Configuration
- Chapter 5: Bridge Configuration
- Chapter 6: PC Card Installation on a Laptop
- Chapter 7: The RF Manager Function
- Chapter 8: Network Printer Setup
- Chapter 9: Technical Support
3e-531AP Wireless Access Point Chapter 8: Network Printer Setup
90 29000125-001 C
3e-531AP Wireless Access Point Chapter 8: Network Printer Setup
29000125-001 C 91
5. Select Create a new port and use the arrow to nd and highlight
LPR Port. Then click Next.
6. Next, in the eld for Name or address of the server providing lpd:
type the IP address assigned to the 3e-520 Gateway LAN. In the
eld for Name of printer or print queue on the server: type lp.
Then click OK.