User's Guide

3e-531AP Wireless Access Point Chapter 6: PC Card Installation on a Laptop
80 29000125-001 C
Performs Site Survey
P û
Resets to factory default
P û
Changes power level on Client device
(laptop)
P P
Can turn Radio On/Off on laptop
P P
Performs Rescan
P P
Performs Self-test
P P
You may need some or all of the following information handy as you
install the FIPS secure drivers on your wireless device’s PC Card inter-
face:
• The driver conguration utility login. The factory default is User-
name equal to "CryptoOfcer,” and Userid equal to “CryptoFIPS;”
• Type of encryption used by your WLAN (AES, 3DES, and wheth-
er you will be using Dynamic Key Exchange);
• Your security certicate, key and Certicate Authority (CA), if us-
ing DKE;
• Your Wireless SSID;
• Your user name and password to access your network account on
the wireless device;
and, if addresses are to be statically assigned:
• Your IP address;
• Your Gateway address;
• Your Subnet Mask.
Follow the instructions that came with your PC Card to complete the
installation. Once the conguration is complete, you should be able to ac-
ces the WLAN.