User's Guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Hardware Installation
- Chapter 3: Access Point Configuration
- Chapter 4: Gateway Configuration
- Chapter 5: Bridge Configuration
- Chapter 6: PC Card Installation on a Laptop
- Chapter 7: The RF Manager Function
- Chapter 8: Network Printer Setup
- Chapter 9: Technical Support
3e-531AP Wireless Access Point Chapter 4 Gateway Conguration
50 29000125-001 C
3e-531AP Wireless Access Point Chapter 4: Gateway Conguration
29000125-001 C 51
Advanced
The Advanced page allows you to enable or disable load balancing
and to control bandwidth.
Load balancing is enabled by default. Load balancing distributes traf-
c efciently among network servers so that no individual server is over-
burdened. For example, the load balancing feature balances the wireless
clients between APs. If two APs with similar settings are in a conference
room, depending on the location of the APs, all wireless clients could po-
tentially associate with the same AP, leaving the other AP unused. Load
balancing attempts to evenly distribute the wireless clients on both APs.
If enabled, the Bandwidth Control function species the maximum
bandwidth given to each wireless client.
Once you have made any changes, click Apply to save.