User's Guide

3e-531AP Wireless Access Point Chapter 4 Gateway Conguration
40 29000125-001 C
3e-531AP Wireless Access Point Chapter 4: Gateway Conguration
29000125-001 C 41
Conguring in Gateway Mode
To congure the 3e-531AP in gateway mode, complete the following
steps.
Open a web browser on your monitor (using Netscape Navigator
3.0 or better or Internet Explorer 4.0 or better) and type in the default
IP address of the gateway on its WAN port (for example, https://
192.168.254.254). If you have changed the LAN address of the 3e-531 AP,
then you will need to enter the LAN network address with a station ad-
dress of .1. For example if the LAN address was changed to 10.0.0, then
you would enter “https://10.0.0.1”.
Then click Go on the Web browser.
You will be asked for your User name and password. You will need to
have the ID and password for the Crypto Ofcer role to change the mode
from access point to gateway. If that has not yet been changed, use the
default “CryptoOfcer” with the password “CryptoFIPS” to allow full ac-
cess. Click on OK and you will be directed to the System Conguration
– General page.