User's Guide

3e-531AP Wireless Access Point Chapter 3: Access Point Conguration
18 29000125-001 C
3e-531AP Wireless Access Point Chapter 3: Access Point Conguration
29000125-001 C 19
LAN
This sets up the default numbers for the rst, second, or third octet for
a possible private LAN function for the access point. The Local LAN port
provides DHCP server functionality to automatically assign an IP address
to a computer Ethernet port. It is not advisable to change the private
LAN address while doing the initial setup as you are connected to that
LAN.
Operating Mode
You need to visit this page only if you will be changing mode from
Access Point or Bridge to Gateway or vice versa. The default setting is Ac-
cess Point. Note that if you change mode, all previously entered informa-
tion will be reset to factory settings. If in Access Point/ Bridging Mode,
you can also select or deselect the FIPS 140-2 Mode. Selecting FIPS 140-2
Mode makes WEP, SNMP, and 802.1x unavailable as encryption options.