User's Guide

3e-531AP Wireless Access Point Chapter 1: Introduction
2 29000125-001 C
3e-531AP Wireless Access Point Chapter 1: Introduction
29000125-001 C 3
Dife-Hellman Key Exchange; and HTTPS/TLS for web services via a
secure link. Operator Authentication is performed by assigning operator
type: Administrator can view congurations and logs, can do non-cryp-
tographic functions such as assigning hostname, domain name, system
date/time, TX Pwr Mode/Level and the like; the Crypto Ofcer role has
total access and control and can perform cryptographic initialization or
management functions such as module initialization, input or output of
cryptographic keys and CSPs, and audit functions.
The 3e-531AP is wall-mountable and physically sealed with special
tape for physical security. Violation of the unit's integrity will cause the
unit to fail and display an Error State alarm, requiring reboot.
Basic Features
The 3e-531AP is housed in a sturdy case which is not meant to be
opened except by an authorized technician for maintenance or repair. The
unit should work without fail. If you wish to reset to factory settings, use
the reset function available through the web-screen management module.
It has the following features:
• Local Ethernet LAN
• Ethernet uplink WAN
• Wireless (802.11b) interface with operating range of 2000+ feet
• AES/3DES encryption
• HTTPS/TLS secure Web
• 802.1x/EAP-TLS
• Sealed cover with tamper-proof tape
• DHCP client/sever
• Firewall
• NAT
• Bridging Mode
• Repeater Mode
• Adjustable Radio Power
• MAC address ltering
The following cryptographic modules have been implemented in the
3e-531AP.
• AES for wireless (802.11b)
• 3DES for wireless (802.11b)
• 802.1x/EAP-TLS for authentication
• SHA-1
• HMAC SHA-1 for rmware upgrade