User Manual
3e-528 Wireless Video Server Chapter 5: Bridge Conguration
66 29000142-001 A
3e-528 Wireless Video Server Chapter 5: Bridge Conguration
29000142-001 A 67
Signal
Strength LED
MAC
Allows you to set the number of one of the Remote
APs which will be listed at the bottom of the
screen once the system is operational.
BSSID
Enter hexadeci-
mal numbers
Add the MAC address of the remote bridge. The
remote bridge's MAC address will appear at the
bottom of the screen.
Note
You can enter a note that denes the location of the
remote bridge.
The Wireless Conguration — Bridging Encryption screen is used to
congure static encryption keys for the wireless bridge. This is an impor-
tant page to set up to ensure that your bridge is working correctly. The
encryption key that you use on this screen must be the same in order for
communication to occur. And on this screen you can only select either a
static 192-bit 3DES key or an AES key of either 128-bit, 192-bit, or 256-bit.
Important: The wireless bridge only starts to work after the encryp-
tion settings are applied. Even if no encryption is going to be used, you
still need to select None and apply.