User Manual
3e-528 Wireless Video Server Chapter 4: Video Conguration
56 29000142-001 A
3e-528 Wireless Video Server Chapter 4: Video Conguration
29000142-001 A 57
Network Settings
This button opens the Network Settings dialog, which allows con-
guration of the TCP/IP, DNS, SMTP, bandwidth usage, and dynamic
IP address notication. This last one is used as a way to give notication
of changes in the IP address when DHCP is used. You can be notied
through FTP, SMTP or HTTP.
Video Settings
This camera icon provides the means to adjust the video image reso-
lution and compression as well as the detection of the specic video
modulation. In addition to this, when the Pan/Tilt/Zoom driver has been
installed, this dialog gives the ability to access the driver specic settings,
such as preset positions, movement speed, and others, depending of what
is supported by the camera or driver.
The image settings give the possibility to change the resolution of the
image as well as the compression level for it. It also allows setting the
image as color or black and white. The compression level can be set from
0 to 100. The lowest the compression level the better the quality. Keep in
mind that less compression implies more data to be transmitted, hence
more bandwidth is used.
Notes:
• A red cross X by the camera icon, it means that the is no camera
connection, or that there is a problem with the camera or cable.
• A Camera-with-pan-tilt icon is displayed only if the camera for
the chosen source is connected to a previously congured Pan Tilt
Serial Port from the drop-down dialog.
• A Disabled icon indicates that the Administrator has disabled the
video source from the Video Settings page.
COM Port Settings
The COM port settings for the Video server are not used in the 3e-528
unit. The two serial ports provided by the Video Card are disabled. A
serial server card is included in the system to provide four serial ports to
control the pan/tilt/zoom function. The conguration of this serial server
card is detailed in the next section.