User Manual
3e-528 Wireless Video Server Chapter 4: Video Conguration
29000142-001 A 51
Chapter 4: Video Conguration
The 3e-528 contains a video server that provides the capability to link
four analog video cameras to the system. The video input is obtained
from the cameras through the BNC connectors. The video image can be
accessed through a built-in web server after the IP address of the video
board has been congured. The instructions describing how to congure
the IP address follow.
NOTE: The video server card is manufactured by Axis Communica-
tions. For detailed setup information, please refer to Axis 2400+ Admin
Manual.
IP Address Conguration for the Video Server Card
The following is needed to set up the video server:
• Video camera
• PC
• 3e-528
• LAN cables
• MAC address of the video card server (This MAC can be found on
a label outside of the unit)
Note: If using static IP address, the PC and the 3e-528 wireless video
server (AP) need to have an IP conguration that allows them to commu-
nicate with each other.
1. Connect a PC to the WAN port using an Ethernet cable.
2. Using a unique IP address—one that is consistent with the system
setup—congure the video server IP address by running the fol-
lowing command from the command prompt:
arp -s<desired IP address><MAC address of the video server>