User Manual
3e-528 Wireless Video Server Chapter 3: Access Point Conguration
34 29000142-001 A
3e-528 Wireless Video Server Chapter 3: Access Point Conguration
29000142-001 A 35
MAC Address Filtering
The factory default for MAC Address ltering is Disabled. If you enable
MAC Address ltering, you should also set the toggle for Filter Type.
This works as follows:
• If Filtering is enabled and Filter Type is Allow Access, only those
devices equipped with the authorized MAC addresses will be able to
communicate with the access point. In this case, input the MAC address-
es of all the PC cards that will be authorized to access this access point.
The MAC address is engraved or written on the PC (PCMCIA) Card.
• If Filtering is enabled and Filter Type is Disallow Access, those
devices with a MAC address which has been entered in the MAC Ad-
dress listing will NOT be able to communicate with the access point. In
this case, navigate to the report: Wireless Clients and copy the MAC
address of any Wireless Client that you want to exclude from communi-
cation with the access point and input those MAC Addresses to the MAC
Address list.