User Manual

3e-528 Wireless Video Server Chapter 2: Hardware Installation
14 29000142-001 A
3e-528 Wireless Video Server Chapter 2: Hardware Installation
29000142-001 A 15
External Power Cable
The 3e-528 has an external power cable for connection to a 110VAC
outlet. The cable is an AC input NEMA-015 plug (standard AC plug).
NOTES:
1. BEFORE ASSEMBLING ITEM 4 ON CABLE PRINT PART
NUMBER (32000466-001) AND CURRENT REV.
2. BEFORE SECURING THE STRAIN RELIEF, ON ITEM 3,
PLACE CABLE JACKET, OF ITEM 2, COMPLETELY
THROUGH STAIN RELIEF AND GROMMET THEN
TIGHTEN.
2
3
6FT MIN - 8FT MAX
4
2
Grommet part
of item 3
See Detail A
Detail A
Sheild Wire
5
Below is the cable pinout information.
Mil Circular Connector 851-06EC12-3S50 (CTI) Signal Name
Pin A AC Line
Pin B AC Neutral
Pin C Ground
The following table provides the bill of materials for the above cable.
F/N Part Number Description Quantity
1 32000466 DWG, Cable Assy, Power, 110VAC,
External
-
2 90000668-001 Line Cord, 18 AWG/3 Cond, SVT
Shield, 10 AMP, 8'
1
3 90000669-001 Connector, Circular, Cable Mount,
Male, 3P
1
4 90000615-001 Shrink Tubing, White, Printable, .5
ID
1.5 inch
5 90000667-001 Terminal, Ring, Non-Insulated,
22AWG, #6 Stud
1