User's Manual

3e–527A3 Wireless Access Point – 8 Port Chapter 3: Access Point Conguration
64 29000152-001 B
3e–527A3 Wireless Access Point – 8 Port Chapter 3: Access Point Conguration
29000152-001 B 65
The random conguration le is used to update the bridging SSID
and bridging encryption on other devices using the existing bridging
link. If the bridging key or the bridging SSID is changed on the normal
conguration screen, then the bridging link to the other devices will be
terminated, and the conguration can not be updated.
To create a randomly generated bridging conguration le, click
Generate. A new conguration is created in a temporary le and an
Install button appears. In order to transfer this le, select the Generated
File radio button, check the desired recipients in the Site Map section, and
click Apply. After the le has been successfully transferred to the recipi-
ents (check the status eld in the lower section), click Install to apply the
randomly generated conguration le to the AP. Once applied, the unit
will reboot and start using the new conguration le.
The automatic IP address conguration feature can be used to assign
a remote device an IP address. This feature minimizes the effort to con-
gure IP addresses in a wireless network. The IP addresses are assigned
on the private class A IP address range (10.0.0.0). By default, this feature
is enabled, so if you want to assign your own IP addresses you need to
disable this feature.