User's Manual

3e–527A3 Wireless Access Point 8 Port Chapter 3: Access Point Conguration
52 29000152-001 B
3e–527A3 Wireless Access Point – 8 Port Chapter 3: Access Point Conguration
29000152-001 B 53
Web Access Log
The Web Access Log displays system facility messages for any con-
guration changes via the web GUI. Along with the old value and new
value, the when/who/what changes are also recorded. For security
reasons, some sensitive data may not be recorded (for example, the en-
cryption key) or may not be completely recorded (for example, the au-
thenticated MAC). For example, this log records when you set encryption
mode, change operating mode, etc., using the web browser. It establishes
a running record regarding what actions were performed and by whom.
The Web access log will continue to accumulate listings and rotate by
half when it reaches the dened maximum size (10 Kbytes). If congured,
an email notication will be sent when the weblog grows to 50% of the
maximum size for the rst time. You can also set another alert point of 60-
90% of the maximum size and an email notication will be sent when this
alert point is reached. You should export the web log to a PC before the
maximum size is reached to the log does not get overwritten. An email
will be sent only once. The exception is if the unit is rebooted, then it will
send an email on each reboot.
NOTE: You need to set up email notication using the System Admin-
istration — Email Notication Conf screen before any emails can be sent
from the unit.