User Manual

79
Figure 10.7.3: Controller Reset
When the Controller reset is complete, you will see one of these two completion screens:
Figure 10.7.4: Controller Update
As the vehicle reset nears completion, the lights under the arms change between many different colors, followed
by a sequence of beeps. When the lights stop changing color, the reset is complete. Upon completion, the lights
freeze on their current colors, so they might all be the same or different colors.
Step 3: Reboot Solo and the Controller
While rebooting, Solo emits its regular startup tones. The lights underneath Solo’s arms also light up green and
change to white in the front and red in the back. If you do not hear and see these signals, then reboot Solo again.
If the lights change colors now, then the vehicle is still resetting. Let Solo finish resetting and then reboot Solo
again once the lights stop changing colors.
After you reboot the controller, it displays the Preflight Update or Waiting for Solo screen.
Figure 10.7.2.5: Controller Screen After Reset
Step 4: Pair Solo and the Controller
For instructions on pairing Solo and the Controller, see section 10.3.
Step 5: Update your system
For instructions on updating your system, see section 2.6.4. The Factory Reset procedure is now complete.