Operation Manual

UP Plus
3D Printer User Manual
3.1.5 Initialis
ing the Printer
Before anything can be printed, the printer must be
the “3D print” menu. The printer will beep and the
will then return the platform
and print head to the pri
(Windows version)
(Mac version)
TIP:
If your printer is not responding properly, the first thing to try is to re
clicking the ‘Initialis
e’ option from the ‘3D Print’ me
printer at the back. Check the
tialis
ed by pressing the front switch on the printer.
4.
Troubleshooting
3D Printer User Manual
v 2013.6.10
ing the Printer
Before anything can be printed, the printer must be
initialised. Click the “
Initialis
the “3D print” menu. The printer will beep and the
initialis
ation procedure will begin. The printer
and print head to the pri
nter’s origin and beep again when it is ready.
(Mac version)
If your printer is not responding properly, the first thing to try is to re
-
initialis
e’ option from the ‘3D Print’ me
nu. If still not working switch off and on the
printer at the back. Check the
printer driver’s trouble shooting section.
The printer can also be
ed by pressing the front switch on the printer.
Troubleshooting
Initialis
e” option under
ation procedure will begin. The printer
nter’s origin and beep again when it is ready.
initialis
e the printer by
nu. If still not working switch off and on the
The printer can also be
ini-