P1 HARDWARE CONNECTION Plug one side of the data transmission cable {as it’ s showing Device Cable) into the scanner, another into the computer USB port and power adapter; The turntable cable is for powering up the turntable, store. 3dmakerpro.
* Device Cable Plug the device cable into the port of the scanner, make sure the red dot is lined up with the groove on the port; To unplug the cable, move backwards the bushing (as marked with the red triangles) and pull out the cable directly. * Turntable Cable Gam The tum table can be powered up by connecting it to the computer or the power adapter with the turntable cable. store. 3dmakerpro.
PACKING LIST Tum table* Manual * Product Images are for [1 initiative purposes ony.
