Data Sheet

Physical Properties Standard Unit Typical Value

Density ISO 1183 g/cc 1.28

Mechanical Properties Standard Unit Typical Value

Tensile Strength, Break ISO 527 MPa 50

Tensile Modulus ISO 527 MPa 1800

Tensile Elongation, Break ISO 527 % 13

Flexural Strength ISO 178 MPa 74

Flexural Modulus ISO 178 MPa 1780

Thermal Properties Standard Unit Typical Value

Glass Transition Temperature (Tg) DSC °C 80

Deflection Temperature at 0.45

MPa (66psi)

ISO 75 °C 75

Electrical Property Standard Unit Typical Value

Surface Resistance ASTM D257 Ohm/sq

>10

- 10

www.3dxtech.com

Technical Data Sheet: 3DXSTAT™ ESD-PETG 3D Printing Filament

TDS Rev 3.0

Disclaimer: The technical data contained on this data sheet is

furnished without charge or obligation and accepted at the

recipient’s sole risk. This data should not be used to establish

specifications limits or used alone as the basis of design. The

data provided is not intended to substitute any testing that may

be required to determine fitness for any specific use.

Printed Specimen Conditions

Printer: Open Source FDM/FFF

Nozzle: 0.4mm

Layer Height: 0.25mm

Infill: 100%, +/- 45°

Extrusion Temp: 250°C

Bed Temp: 70°C

Specimen Orientation: XY Flat