Cube 3 User Guide

183D Systems, Inc.
4. Mount the cartridge on the right side of the printer and select the checkmark to
continue.
NOTE: It may become necessary to slightly rotate the cartridge to
seat it properly.
NOTE: The print jet will begin to heat. Once the print jet has reached
the proper temperature, the printer will prime melted material into
the refuse bin.
5. The right cartridge has been installed. Select the checkmark to continue.
6. Select PRINT.
7. It is recommended that Auto Level is performed prior to the rst print. Ensure
the print pad is clean and installed properly and then select the checkmark to
continue to Auto Level.
NOTE: Auto Level should be performed when the printer is
positioned away from bright lights or direct sunlight.
NOTE: When installed properly, the print pad magnetically attaches
to the adjustment knobs.