Cube 3 User Guide

173D Systems, Inc.

NOTE: The print jet will begin to heat. Once the print jet has reached

the proper temperature, the printer will prime melted material into

the refuse bin.

4. The left cartridge has been installed. Select the checkmark to continue.

NOTE: The printer will begin to heat. Wait until the printer

has nished heating and then follow the user prompts in the

touchscreen menu.

5. Insert the print jet (from the cartridge that will be mounted on the right side of the

printer) into the right print jet opening on top of the printer.

6. Rotate the print jet clockwise until the dots align. Select the checkmark to

continue.

NOTE: As you rotate the print jet, ensure the print jet tube is tucked

under the top of the printer cover.