Cube 3 Quick Start Guide

20
NOTE: If Auto Gap is not successful, it is
recommended that you perform Auto Level and
Auto Gap again. Select AUTO LEVEL to continue.
NOTE: If Auto Gap is not successful the second
time, select PLATE MAINTENANCE. For more
information, refer to the section titled PRINT PAD
MAINTENANCE. Once the PLATE MAINTENANCE
procedure has been performed, perform Auto
Level and Auto Gap.
NOTE: If Auto Gap is still not successful, select
MANUAL GAP ADJUSTMENT. Refer to the
section titled Manual Gap Adjustment for more
information. Once the Manual Gap Adjustment
has been performed, note the nal reading for
future reference.
25. Select PRINT.