Cube 3 Quick Start Guide

18
NOTE: Follow the instructions on the touchscreen
display. Use the included 1.5 mm Allen wrench to
loosen the lock screws before turning the knobs.
Select the checkmark to continue.
NOTE: The lock screw for knob A can be accessed
from behind the printer. The lock screw for knob B
can be accessed from the front of the printer.
NOTE: Follow the instructions on the touchscreen
display. After the adjustments have been made,
select the checkmark to continue.
NOTE: When prompted, tighten the lock screw
enough to ensure the adjustment knob does not
easily turn. Select the checkmark to perform Auto
Level again.