Cube 3 User Guide

493D Systems, Inc.

Print Settings

Print Settings allow you to set the parameters of your print and build them into your print le. There are four (4) different options for

setting the print parameters.

Presets

• Draft A print that does not require strength or ne details.

• Standard A strong print that does not require ne details.

• Premium A strong print that requires ne details.

• Custom Allows you to set the layer thickness, density, and ll pattern. You may also enable or disable

supports and rafts.

Layers

• 0.070 mm High quality prints

• 0.200 mm Shorter print time

Density

• Hollow Short print times and low material use

• Strong Stronger prints

• Almost Solid High material use and almost solid prints

Fill Pattern

• Honeycomb Used for strong prints

• Diamonds For general printing

• Lines Shorter print time