Cube 3 User Guide

303D Systems, Inc.
NOTE: The printer will load the print le.
NOTE: The estimated time to completion is noted at the bottom of
the screen.
NOTE: The blue bar at the top is also a progress indicator that shows
the status of the loading process.
NOTE: The print jets will begin to heat.
CAUTION: Do not touch the print jets until they have cooled to room
temperature.
NOTE: The estimated time to completion is noted at the bottom of
the screen.
NOTE: The blue bar is a progress indicator that shows the status of
the print jet heating process.
NOTE: The blue bar is a progress indicator that illustrates the status
of the print.
NOTE: Select PAUSE to temporarily stop printing. Select CANCEL if
you wish to cancel the print job.
NOTE: Press the time at the bottom of the screen to view the
percentage of completion. Press it again to view how many layers
have been printed. After a few seconds, the default time will appear
again.
NOTE: If you selected CANCEL to cancel the print, select CANCEL
again to conrm your decision. Otherwise, select RESUME to
continue printing.
4. Once the printer has nished printing, select the checkmark to continue.