Cube 3 User Guide

93D Systems, Inc.
4. Open the box.
5. Remove the upper foam support.
6. Remove the printer from the box and remove the protective bag from the printer.
Place the printer on a solid, level base where you intend to use it.
NOTE: When installing the printer there must be a minimum of 8”
(203 mm) of space on top and on either side of the printer.
NOTE: There must be a minimum of 4” (102 mm) space in front of
and behind the printer.
7. Remove the top insert.
8” (203 mm)
8” (203 mm)
8” (203 mm)
Hand Clearance Around the Printer Build Plate Travel Area
4” (102 mm)
4” (102 mm)
Back
Front
Front View Top View