User Guide
Table Of Contents
-  Introduction
-  Important Safety Information
-  CubePro 3d Printer Features and Benefits
-  At a Glance
-  Specifications and Requirements
-  Unpacking and Setting up Your CubePro
-  Printing Your Creation
-  Finishing Your Creation
-  CubePro Software
-  Operation Procedures
-  CubePro Maintenance
- Restoring Roughness to the Print Pad
- Cleaning the Jet Wiper
- General Cleaning
- Adjusting the Jet Wiper Assembly
- Calibrating the Print Pad
- Calibrating the Z-Gap And Print Pad Level
- Calibrating the Offset Jets
- Calibrating the Wipe Function
- Testing the Print Jets and Extruders
- Moving the Print Jets
- Updating the CubePro Firmware
- Replacing Fuses
- Lubricating The Bearing Rods
- Error Codes
- Contacting Support
-  Cubify Sustainability Program
403D Systems, Inc.
Build Settings
A
Print Mode
The software has four modes
including 3 set modes and one
custom mode
B
Layer
Resolution
The detail and smoothness of a
part
C
Print Strength
The strength of the inner structure
of a creation
D
Print Pattern
The design of the inner structure of
a creation
E
Raft and
Support
Selection of the types of materials
used to create rafts, supports and
sidewalks.
F
Advanced
Adjustments to print pattern ll and
the creation shell
G
Help Opens the help menu
F
A
B
E
C
D
G