User Guide
Table Of Contents
-  Introduction
-  Important Safety Information
-  CubePro 3d Printer Features and Benefits
-  At a Glance
-  Specifications and Requirements
-  Unpacking and Setting up Your CubePro
-  Printing Your Creation
-  Finishing Your Creation
-  CubePro Software
-  Operation Procedures
-  CubePro Maintenance
- Restoring Roughness to the Print Pad
- Cleaning the Jet Wiper
- General Cleaning
- Adjusting the Jet Wiper Assembly
- Calibrating the Print Pad
- Calibrating the Z-Gap And Print Pad Level
- Calibrating the Offset Jets
- Calibrating the Wipe Function
- Testing the Print Jets and Extruders
- Moving the Print Jets
- Updating the CubePro Firmware
- Replacing Fuses
- Lubricating The Bearing Rods
- Error Codes
- Contacting Support
-  Cubify Sustainability Program
213D Systems, Inc.
Print Jet Calibration
CONTROL JETS allows the user to test the operation of the extruders and print jets.
OFFSET JETS is a utility that denes the parameters of the space between the print
jets.
CAUTION: Do not change any of the values in the OFFSET JETS
utility unless advised to do so by Cubify Support. Any changes
will alter the print quality of your creations.
Network
The Network menu allows the user to connect to a wireless network or to an ad hoc
device.
System
SELECT LANGUAGE allows the user to localize the printer to their language.
LIGHT allows the user to turn on or off the print jet LEDs. The other interior LEDs are
managed by the rmware when the CubePro is powered on.
Advanced
Selecting the FIRMWARE icon allows the user to update their rmware either with a
le downloaded to a USB mass storage device or by wireless connection.
By selecting INFO, the printer will display the printer status including the serial
number, the print jet temperatures, and the name of the wireless network to which the
printer is connected.
Material Upgrades
MATERIAL UPGRADES us a utility that activates the use of optional materials
within the printer once the upgrade has been purchased. Once the upgrade has
been purchased on www.cubify.com, you will receive an activation code that must be
entered into the touchscreen display.