User Guide
Table Of Contents
-  Introduction
-  Important Safety Information
-  CubePro 3d Printer Features and Benefits
-  At a Glance
-  Specifications and Requirements
-  Unpacking and Setting up Your CubePro
-  Printing Your Creation
-  Finishing Your Creation
-  CubePro Software
-  Operation Procedures
-  CubePro Maintenance
- Restoring Roughness to the Print Pad
- Cleaning the Jet Wiper
- General Cleaning
- Adjusting the Jet Wiper Assembly
- Calibrating the Print Pad
- Calibrating the Z-Gap And Print Pad Level
- Calibrating the Offset Jets
- Calibrating the Wipe Function
- Testing the Print Jets and Extruders
- Moving the Print Jets
- Updating the CubePro Firmware
- Replacing Fuses
- Lubricating The Bearing Rods
- Error Codes
- Contacting Support
-  Cubify Sustainability Program
163D Systems, Inc.
8. Enter your serial number twice and select Activate.
NOTE: Your 4-digit activation code will appear. Please note the
activation code because it will need to be entered into the printer’s
touchscreen display to activate the printer.
NOTE: You can access the User Guide, software for either Windows
or Apple operating systems, and free creations.
9. After receiving your activation code during the registration and warranty
activation process, enter your 4-digit code in the touchscreen display. Select
the checkmark to continue.
NOTE: If the wrong activation code was entered, select RETRY and
enter the activation code again.
10. Select the checkmark to complete the activation process. Your printer is now
ready to print a creation.