User manual

ManualsBrands3D SIMO Manuals3D PrintingMini 2 3D printer pen ABS, PLA, Polyamid (PA) / Nylon, PETG, HIPS, Laywood 1.75 mm

After inserting any extension, you’ll see

its name on the display and then the

temperature indicated in percentages.

100% corresponds to 480°C.

For preheating it is required to hold

the front button. To enable continuous

preheating, press both front buttons

simultaneously for at least 2-3 sec.

(Figure No. 7).

4.

EXTENSIONS FOR WELDING,

CUTTING AND BURNING:

5.