User manual

ManualsBrands3D SIMO Manuals3D PrintingMini 2 3D printer pen ABS, PLA, Polyamid (PA) / Nylon, PETG, HIPS, Laywood 1.75 mm

Pressing the button for reverse running

and hold it until the entire string comes

out. Then, remove the string and insert

another one with a ﬂat end (Fig. No.

8). (Remove the ﬁlament only after

warming up the 3Dsimo mini and

activating the feed mechanism!)

3.

C) REPLACEMENT AND

REMOVAL OF THE FILAMENT:

5.