User manual

ManualsBrands3D SIMO Manuals3D PrintingMini 2 3D printer pen ABS, PLA, Polyamid (PA) / Nylon, PETG, HIPS, Laywood 1.75 mm

insert the ﬁlament into the rear

opening and press the forward button

(Figure No. 6); at the same time you

need to gently push the string to get it

into he feed mechanism. Then it takes

approximately 10 seconds before

the wire reaches the nozzle and

the material starts ﬂowing from the

3Dsimo mini.

3.

A) INSERTING THE FILAMENT:

5.