Instruction Manual

8
Operating Parameters
Camera Canon SX260
Camera Orientation Landscape (top facing forward)
Operating Altitude 50-120 m
Default Altitude 60 m
Low-Wind Conditions 0-6 m/s
High-Wind Conditions 7-10 m/s
Maximum Wind Conditions 10 m/s
Operating Speed 1-17 m/s
Default Speed 5 m/s
Estimated Maximum Flight Time 14 min
Estimated Ground Resolution 2 cm/pixel
Estimated Maximum Survey Area .1 km
2
Minimum Photo Interval 2 seconds
The X8 is a complete solution for creating high-resolution
visual-spectrum aerial maps.
Pixhawk
autopilot
system
Pix4Dmapper
LT 3DR Edition
Canon SX260
3DR EAI
To create a map, the X8 flies an autonomous mission over
the survey site, using the integration between the Pixhawk
autopilot and custom-programmed camera to capture
images at a consistent distance interval. Pix4Dmapper
then stitches these images together into a georeferenced,
orthorectified mosaic.
The accuracy of the map depends on the configuration of
the mission. Planning a mission that captures high-quality
images requires balancing the X8’s operating parameters
with the environmental factors at the survey site.
Mission Planning
Operating Parameters