User Manual

Configuration
To enable the airspeed sensor, connect Pixhawk to Mission Planner (or APM Planner for
OS X), and select the Advanced Parameter List under the Configuration tab. Locate the
ARSPD_PIN parameter and set to 65. Select Write Params to apply.
For instructions on downloading software and connecting Pixhawk, visit 3dr.com/learn.
Specifications
» Measurement Specialties 4525DO sensor, one psi measurement range
(roughly up to 100 m/s or 360 km/h or 223 mp/h)
» Resolution of 0.84 Pa
» Data delivered at 14 bits from a 24 bit delta-sigma ADC
» M3 / 6-32 mounting holes
For customer support, contact us at [e-mail]
or call our support line at [phone]
Monday through Friday, from 8 am to 5 pm, PST.
Pixhawk Digital Airspeed Sensor Manual V1 | ©3D Robotics, Inc. | 11 March 2014
Support