User's Guide

pg. 29
A.3 Radio Antenna Mounting
3D-P antennas come with 2” handrail/pole mounting brackets. Assembly of the antenna
should not be performed without guidance from 3D-P’s Service team assisting with the
installation. Factors including type of radio, location of installation, and type of application
all play a part in the way each radio antenna should be installed.
Please consult this document for further information: 3D-P Intelligent Endpoint Installation Guidelines,
Document Number 051612-01, Revision 1.4.
A.3.1 Bracket Assembly
Following is a snapshot of the antenna bracket componentry:
1. Antenna bracket
2. Antenna collar
3. Cable strain relief
4. U-bolt, M10, 2.0” OD X 2.88”
5. U-bolt, M6, 0.75” OD X 1.69
6. Screw, pan, 8-32x ¼ ”
7. Washer, lock, spring, M10
8. Washer, lock, spring, M6
9. Nut, hex, M6
10. Nut, hex, M10
Figure 14: Bracket assembly