User's Guide

A.2 Connecting Power
This section explains how to connect power to the Endpoint. It also covers explanation of
grounding on mobile machinery and best practices for installation.
For more information on best practice, proper installation techniques and guidelines please refer to the
document: 3D-P Intelligent Endpoint Installation Guidelines, Document Number 051612-01, Revision 1.4.
A.2.1 Cable Connections
The device must be powered from a 3D-P power cable with an in-line weather-proof fuse
holder.
Use the following procedure to connect power to the Endpoint:
1. Connect the red wire to a DC voltage source (12-36VDC).
2. Connect the black wire to the (DC-) DC Voltage source (0VDC).
3. Connect the white wire to the DC Voltage source's chassis, or earth ground (#8 ring terminal).
4. Connect the green wire to the DC Voltage source's chassis, or earth ground (#8 ring terminal).
Figure 11: Cable termination