User's Guide

Appendix A : Physical Installation
This appendix covers basic installation information on mounting the Intelligent Endpoint as
well as connecting power, data and antenna cables.
Each installation will vary depending on the type of equipment and the type of radio technology
being used.
For more information on best practice, proper installation techniques and guidelines please
refer to the document: 3D-P Intelligent Endpoint Installation Guidelines, Document Number
051612-01, Revision 1.4.
A.1 Mounting
Mounting the Endpoint is done using a heavy duty, steel flanged bracket. The bracket is
mounted to the base of the IEP using ¼” - 20 x ½” flat head screws supplied.
A.1.1 Dimensions
Once the bracket is mounted, the Endpoint should be secured to a rigid structure whereas the
structure should not introduce additional vibration or shock. The flanged tabs on the bracket
accept ¼” bolts. Please take note of the required dimensions for mounting and allowances for
cabling.
Figure 9: Relevant dimensions