User's Guide

Table 7: Rajant LED Feedback
Color Status
White (red, green and blue LEDs together;
may appear pale blue or pale green)
Powered on; start of boot process
Red-Blue-Green scrolling in succession End of successful boot process
Solid Blue
Ready, but no connected Mesh peers
(unit may have Ethernet peers)
Blinking Green
At least one connected Mesh peer; all peers are connected at less
than 24 Mbps
Solid Green
At least one conn
ected Mesh peer; one or more peers are connected
at 24 Mbps or faster
Blinking Yellow
(with short and long pauses between blinks)
Numeric warning code
Blinking Red
(with short and long pauses between blinks)
Numeric error code
Blinking Yellow
(blinking at an increasing rate)
BreadCrumb is in the process of installing firmware
All LED colors scrolling in rapid succession
(with a short pause between every cycle)
Successful firmware installation; ready to reboot
All LED colors scrolling in rapid succession
(with no pause)
Identify mode is ON