User Manual

page 2
... print your plane | www.3DLabPrint.com
Focke-Wulf Ta 152 H
– fully printable R/C plane for your desktop 3Dprinter
Future of flying - Print your own plane.
Fully 3D printable RC model of the “Höhenjäger” german attack plane, specially designed to
meet ACES aircombat requirements, but also as a cheap and easy to build RC model for ev-
eryday flying. Many scale details such as armament, airframe plating or exhausts encourag-
es to create realistic paint jobs. Huge wing area results in nice stall characteristics and easy
landings. Get ready for battle with this great performing flying legend!
The first fully printable airplanes with files prepared for your 3Dprinter, with
flight characteristics, comparable or even supperior to classic build model airplane.
This is not a dream, now you can print this HI-TECH at home. Simply download and print
the whole plane or spare parts anytime you need just for a cost of filament only about $18
Extensive hi-tech 3d structural reinforcement making the model very
rigid while maintaining a lightweight airframe and exact airfoil even it’s just a plastic. This
perfect and exact 3d structure is possible only thanks to additive 3dprinting technology. So
welcome to the 21st century of model flying and be the first at your airfield.
Easy to assembly, you don’t need any extra tools or hardware, just glue printed
parts together and make pushrods for control surfaces. The rest of the assembly is very
easy. Simply add brushless motor, ESC, servos and radio system. Don’t worry, detailed step
by step PDF/VIDEO is included.
You’ll get a superb performing airplane with highly ecient powerplant capable of flying 7+
minutes at full throtle and speeds exceeding 110 kph (HP setup). Low stall speed is achieved
for easy landing on the other hand.