User Manual

page 19
... print your plane | www.3DLabPrint.com
ACES performance setup - (530W)
Motor: DYS D4215 650KV (for 6S setup)
ESC: CastleCreation Talon 25A / 6S or similar
Propeller: two blade Aeronaut CAM Carbon Light 10 x 6 or APC Electro 10 x 5,5
Battery: Li-Pol TATTU GensAce 1800mAh 75C 6S1P Battery Pack
printed PET motor mount with alluminium cross mount
OFFICER normal setup - (440W)
Motor: EMAX MT 3510 600KV (for 6S setup)
AX-4008Q 620KV (for 6S setup, motor is discontinued
- use it from your old planes)
ESC: YEP 40A/6S or CastleCreation Talon 25A / 6S or similar
Propeller: two blade APC electro 10 x 5,5 or Aeronaut CAM Carbon Light 10 x 6
Battery: Li-Pol 1500mAh 6S1P Battery Pack
printed PET motor mount with alluminium cross mount
ROOKIE setup - (240W)
Motor: Leopard LC2830 980KV (for 3S setup)
ESC: Turnigy 20A / 3S or similar
Propeller: two blade GWS 9 x 7,5 (ugly orange)
Battery: LiPol 1300mAh / 3s
printed PLA mount 16 x 19 mm
(budget setup for LW hybrid version only)
Use power by your skill !
Our inovative motor holder can be used with various motors. Every motor should fit
at universal printed holder with alluminium cross or 16 x 19 printed holder. Insert the
complete assembly inside the slot in position you need and glue it .