User Manual

page 9
... print your plane | www.3DLabPrint.com
Step By Step PDF/VIDEO userguide
1. Choose airplane at www.3Dlabprint.com. Our Facebook for live information.
Basic requirements for Qtrainer is 195/195/150mm build
volume. Nozzle 0.4mm recommended (0.35 or 0.5mm
alternativelly). Heated bed recommended.
PLA filament (or PETG, APLA, htPLA, PC-max.... not ABS) and
some flex for tires...
If you feel a little bit confused you can download test part
from our FORUM (usualy the biggest part)
2. Create account, download
You will get the download link for all files sent to your email (zipped) or you can log in to your
account and download directly from our websites.
3. Gcodes preparing
option A Gcodes:
If your printer is i3 compattible you can directly use the prepared gcodes. Simply save each to
an SD card and let 3d printer do his job. The HE temperature is set to 230°C for best layer
bonding. You can edit speed and temperature on your printer LCD only. If Gcodes does not
work please proceed to the next options.