User Manual

page 2
... print your plane | www.3DLabPrint.com
Qtrainer
– fully printable R/C plane for your desktop 3Dprinter
Future of flying - Print your own plane.
We still trying move things further, so this project is again full of other improvements
for better durability , easier assembly , better geometry solution and so on..., we hope you
enjoy it, although this print may test your competencies to and quality of your printer
(welcome to the thin wall printing)
The first fully printable airplanes with suitable files prepared for your 3Dprinter.
Flight characteristics are comparable or even better than classic build model airplane.
Simply download and then print it anytime you need only for $18 (filament cost).
This is not a dream. Now you can print this HI-TECH …. at home, print spar parts,
and so on...
Extensive hi-tech 3d structural reinforcement which makes
the model very rigid while still maintaining a lightweight airframe and exact airfoil even
when it is made only from plastic. This perfect and exact 3d structure is possible only due
to additive 3dprinting technology. So welcome to the 21th century of model flying. Be the
first at your airfield.
Easy to assemble, you do not need any extra tool or hardware, you only need
to glue printed parts together and make pushrods for control. The rest of the assembly is
very easy.Simply add brushless motor, ESC, servos and radio system. Don´t worry, detailed
step by step PDF/VIDEO is included.
You will get a superbly performing training and durable airplane suitable even for hard
landings (with easy to change landing gear). Our Qtrainer is a spin-stall proof plane even
in low speed tight turn.