User Manual

page 14
... print your plane | www.3DLabPrint.com
5. Assembling printed parts
5.1 Wing assembly
Glue all wing parts L1-L6 and R1-R6 with CA glue together (position locks will help you),
use activator. Glue ailerons parts together and install it by hinges. We recommend CA Hinge
sheet and thin CA glue. You can use snap knife to clearing shape of some printed parts, but
mostly it is not necessary.
See video guide #4
you will need: CA Glue - medium or similar medium viscosity CA glue
CA Hinge Sheet or similar
Activator for CA Glue or similar, but gas presurized aerosol is better
Snap knife
wing L 1
49g/1.72oz
aileron L 1
6g/0.21oz
aileron L 2
4g/0.14oz
aileron L 3
6g/0.21oz
aileron L 4
6g/0.21oz
wing L 2
49g/1.72oz
wing L 3
25g/0.88oz
wing L 4
39g/1.37oz
servo wing cover
2g/0.07oz
wing L 5
35g/1.23oz
wing L 6
10g/0.35oz