User Manual

the world‘s best designers united
Hatch Assembly
You will need a spring from a ball point pen or similar. The latch has a recess that fits the
characteristic dragon fin shaped dorsal antenna. The side with the recess should point
upwards. Make sure the spring can be pushed onto the latch. Insert the latch and spring into
the slot in the hatch. Press the latch all the way in and glue the dorsal antenna into the
recess on the latch. Use medium cyano and be careful not to get glue between the hatch
and the latch. You should now be able to operate the latch mechanism by moving the dorsal
antenna back and forth.