User Manual

page 5
... print your plane | www.3DLabPrint.com
Included:
1. STL 3d files
Universal STL files designed for use with desktop FMD 3d printers and slicer software such
as Simplify3D (recommended) CURA or MatterControl (these STLs are not compatible with
Slic3r or Makerware slicers).
2. Factory files for Simplify3D slicer
with all our settings, these Factory files include all you need. Note: we‘re using PRUSA i3
ORIGINAL printers so you may need to adjust the basic printing parameters to match your
printer or use it as a starting point for you. Please check the Simplify3D
3. Step By Step PDF/VIDEO userguides
Apart from this userguide, please read / watch the Printing Guide with some Tips and Advice
for airplane printing (Thin Wall Printing) and the Help section of the website.