User Manual

page 3
... print your plane | www.3DLabPrint.com
General specifications:
Length: 1427mm / 55.7 inch
Wingspan: 1427mm / 55.7 inch
Height: 560 mm / 21.8 inch
Wing area: 45,76 dm2 / 4.92 sq foot
Wing loading: 104 g/dm2 / 28 oz at sq foot
Center of gravity: 248mm (9.68 inch) from LE
See CG tags on wings...
Airfoil: 3DLabPrint modified
Print weight: 2485 g / 87.6 oz
Empty weight (w/o battery): 3900 g / 137.5 oz
Takeo weight (2x 3s 3700 lipo): 4760 g / 167.9 oz
Max takeo weight: 5500 g / 194.0 oz
Never exceed speed, VNE: 200 km/h / 125 mph
Design maneuvering speed, VA: 120 km/h / 75 mph
Stall speed: 50 km/h / 15 mph
Powerplant
EDF: 90mm for 6S (or 8S) Li-Pol
Motor: 1750kV
ESC: 100A Electronic Speed Controller
or similar 80-100Amps
Battery: 2x Li-Pol 6200mAh/3s (40-65C),
at least 451g / 17.9oz, 65C
(fuselage space for 3000-6200mAh packs)
Performance measurement
Max speed VH (level flight): 150 km/h
80 kn
90 mph with 6s Li-Pol
Rate of climb: 46 m/s (10 673 ft/min)
Flight time (2x 3s 6200mAh): 11:00min