User Manual

page 24
... print your plane | www.3DLabPrint.com
11. Pilots Please Attention!
For the first flights we recommend setting the center of gravity to around 5 mm forward
of the CG tag - nose heavy, this increases the stability (you can use heavier battery). Also
increasing the expo settings on your transmitter for elevator and aileron to 60 % calms the
response from your stick inputs or you can decrease elevator and ailerons deflection.
Make sure the battery is well fixed in proper position. If it moves during flight it will cause the
CoG move backwards and can lead to uncontrollable flight behavior.
When you feel comfortable, you can use the suggested balance of the aircraft, and set expo to
30-50 % ... to gain back extra maneuverability. This is not a beginner plane. Be sure you have
enough experience flying RC models before attempting to fly this jet.
Spend at leats 10 hours with RC flight simulator before you go out for the first time.
Flite test: RC Planes for beginners (but note: we use primary ailerons for turn, not only rudder)
See your F-86A Sabre flight video!
Please, use these files only for your own purpose, do not
send it further. Thank you very much. Enjoy your flight.