User Manual

page 21
... print your plane | www.3DLabPrint.com
Standard Power
Dr Mad Thrust 11-Blade Alloy 90mm - standard quality, not so nice sound.
Mount strap for 90mm Alloy DPS Fan
NOTE: Our Dr Mad Thrust unit arrived without holder, probably you‘ll need it ordered
separatelly Mount strap for 90mm Alloy DPS Fan.
See video guide #9
You will need: 90mm EDF for 6s-8S Li-Pol, 3-4kg thrust, not so long body...
Dr Mad Thrust 11-Blade Alloy 90mm
EDF unit with 1750kv Motor - 90mm
or similar
fitting screws
9.1. Cooling system
Keep your controller cold! Use strong enough 90 - 150 A ESC. Make a short flight and watch
the controller temperature after landing. Cooling vents helps keep the airflow around ESC.
hot air
output
cold air
input
cold air
input