User Manual

page 20
... print your plane | www.3DLabPrint.com
8.1 Electro Ducted Fan propulsion system
Our F-86A Sabre was designed for 90mm EDF. We tested it with 6S and 8S Li-Pol and 3-4kg
thrust. The use of more powerful drives has not been tested or designed for. We do not take
responsibility for using overpowered EDFs. Be careful with the powerplant.
You can use hot wire or dremel tool to prepare the EDF holder in the fuselage. Mount your
EDF, push it well to the outtake and use screws to secure it in place. Measure the distance
betwen intake channel and the EDF. Print the cover ring in measured lenght. Cut it o to the
right dimension and use cabel binder to secure it. Test your power unit.
Top Power
Use top brand carbon EDF with excellent quality and sound, with ESC Jeti Mezon for perfect
telemetry tuned setup.
High Power
12 Blade High-Performance 90mm EDF Unit - high quality thrust and sound with Turnigy
3553-1800 90mm EDF Brushless Fan Motor and 100A ESC.