User Manual

page 10
... print your plane | www.3DLabPrint.com
option B Factory files Simplify3D (recommended)
We prepared all you need in these files (basic FFF profiles, parts layout, and so on...)
You can use our settings as a starting point and edit according to your printer needs, print
only the spare parts, etc... It should work as it is for most printers, but please go through the
settings and edit it as needed. We are not liable for any damage resulting from the use of
our settings. If for any reason this does not work for you, please proceed to the next option.
option C Simplify3D manual setting (watch and learn)
Use our Guide to build your own factory file. This is a very good option to learn a lot
about Simplify3D and become a 3D expert. Of course you spend a lot of time and the You-
Tube pause button will become your best friend. For simplification we show only our basic
setting (wings and fuselage), please use our prepared Factory files as a reference for the rest
of parts, like motor mounts, control surfaces, etc.
AND... please look at VideoGuides:
video 2 Simplify3D setting
video about Thin Wall Printing