User Manual

page 15
... print your plane | www.3DLabPrint.com
5.2 Fuselage assembly
Glue wing parts with CA glue together (position locks will help you) use activator. You can use
snap knife to clearing shape of printed parts....
NOTE: Don‘t glue the tailparts yet !!! (for rudder, elevator and stabilizers proceed to next
step)
See video guide #5
You will need: CA Glue - medium or similar medium viscosity CA glue
Activator for CA Glue or similar, but gas presurized aerosol is better
Snap knife
Soldering Iron or any hot tool
F2
51g/1.80oz
F3
92g/3.25oz
F4
54g/1.90oz
F5
52g/1.83oz
F6
33g/1.16oz
F7
26g/0.92oz
V stabilizer
15g/0.53oz
R elevator
12g/0.42oz
rudder
23g/81oz
R Hor stabilizer
25g/0.88oz
F8
23g/0.81oz
F1
52g/1.45oz
battery cover
17g/0.60oz